PROBLEMS WITH STORING 10-34-0

Website Editor • September 20, 2017

A few weeks ago NACHURS tweeted out a picture of 10-34-0 sludge at the bottom of a large Co-op holding tank.  This photo has been retweeted quite a few times, so I thought I would talk about why this happens.  Anybody who has used 10-34-0 knows that it isn’t exactly the nicest fertilizer to work with, and anybody who has stored 10-34-0 has no doubt dealt with the impurities and metals falling out of solution leaving a layer of sludge in the bottom of their tanks. Why does this happen?  What can we do differently?  Let’s take a look. Ammonium Polyphosphate (APP), 10-34-0, and not as common 11-37-0, is super phosphoric acid reacted with ammonia at high temperatures then cooled and diluted with water (this is a simplified version but you get the idea).  Polyphosphates are chemical chains of phosphate molecules that have the ability to sequester heavy metals not fully removed during beneficiation of the raw phosphate ore.  Many impurities remain such as chlorine, fluorine, magnesium, aluminum and carbon.  APP or 10-34-0 begins to breakdown or hydrolyze, which is a normal process, as 10-34-0 is stored and used.  As the fertilizer breaks down it can no longer sequester the heavy metals and they begin to fall out. This results in precipitates and sludge that need to be cleaned out of tanks every year or two.  We all know that the low man on the totem pole gets this job. What can you do to avoid this?  Well, that all depends on what you are willing to do.  You can switch from 10-34-0 to a different fertilizer.  Generally if the fertilizer is green, amber, or black in color it contains super phosphoric acid (SPA) which is the base for APP fertilizers.  Clear fertilizers look like water and use purified phosphoric acid (PPA) which is processed more and contains far fewer impurities.  If processed even more it can be considered food grade phosphoric acid which is used in many processed foods like soft drinks.  Generally speaking the more processing the more expensive the product. NACHURS 6-24-6 is a green product which is 20% polyphosphate and 80% orthophosphate which is readily available phosphate.  This is very competitively priced and is by far easier handling and less corrosive than 10-34-0.   Generally the cheaper the fertilizer the more APP it contains and the more impurities there are.  Most NACHURS starters are clear using PPA which is 100% orthophosphate; it is a little higher priced but many say it is money well spent.

A few weeks ago NACHURS tweeted out a picture of 10-34-0 sludge at the bottom of a large Co-op holding tank.  This photo has been retweeted quite a few times, so I thought I would talk about why this happens.  Anybody who has used 10-34-0 knows that it isn’t exactly the nicest fertilizer to work with, and anybody who has stored 10-34-0 has no doubt dealt with the impurities and metals falling out of solution leaving a layer of sludge in the bottom of their tanks. Why does this happen?  What can we do differently?  Let’s take a look.

Ammonium Polyphosphate (APP), 10-34-0, and not as common 11-37-0, is super phosphoric acid reacted with ammonia at high temperatures then cooled and diluted with water (this is a simplified version but you get the idea).  Polyphosphates are chemical chains of phosphate molecules that have the ability to sequester heavy metals not fully removed during beneficiation of the raw phosphate ore.  Many impurities remain such as chlorine, fluorine, magnesium, aluminum and carbon.  APP or 10-34-0 begins to breakdown or hydrolyze, which is a normal process, as 10-34-0 is stored and used.  As the fertilizer breaks down it can no longer sequester the heavy metals and they begin to fall out. This results in precipitates and sludge that need to be cleaned out of tanks every year or two.  We all know that the low man on the totem pole gets this job.

What can you do to avoid this?  Well, that all depends on what you are willing to do.  You can switch from 10-34-0 to a different fertilizer.  Generally if the fertilizer is green, amber, or black in color it contains super phosphoric acid (SPA) which is the base for APP fertilizers.  Clear fertilizers look like water and use purified phosphoric acid (PPA) which is processed more and contains far fewer impurities.  If processed even more it can be considered food grade phosphoric acid which is used in many processed foods like soft drinks.  Generally speaking the more processing the more expensive the product.

NACHURS 6-24-6 is a green product which is 20% polyphosphate and 80% orthophosphate which is readily available phosphate.  This is very competitively priced and is by far easier handling and less corrosive than 10-34-0.   Generally the cheaper the fertilizer the more APP it contains and the more impurities there are.  Most NACHURS starters are clear using PPA which is 100% orthophosphate; it is a little higher priced but many say it is money well spent.


December 12, 2024
We are at the point in the year where things are slowing down around the farm and it is time to reflect on the season to remind ourselves what we learned. Over the last couple of weeks, the District Sales Managers and I have spent some time reflecting on what worked well in the field and the challenges we faced too. Here are the top 5 things we learned from 2024 growing season: #1 Split applying Nitrogen and Sulfur is a practice that should be embraced on a yearly basis when growing corn. Do you remember how the planting season started and what happened in the first 60 days after the planters started rolling? Our field conditions started out dry with some areas of the corn belt showing up on the drought map. Then mother nature blessed us with rain that never stopped in some areas making it difficult to finish planting. Growers that had split applied their Nitrogen and Sulfur were able to avoid nutrient loss from the rain but also apply the nutrients when the crop needed it most. In the end yield was better on split applied nitrogen fields compared to fields that had all the N applied in the fall or spring before planting. #2 For the past 2 seasons in the North region, we have seen the benefits of adding NACHURS Humi-Flex FA to the in-furrow starter fertilizer. NACHURS Humi-Flex FA is our fulvic acid and it is becoming a valuable component in our starter fertilizer for many reasons. We are using it to chelate the nutrients in the starter fertilizer especially phosphorus. Humi-Flex FA also buffers the soil pH to neutral in that nutrient band keeping nutrients available in fields that have less then optimal pH for crop growth. Finally, we use Humi-Flex FA to create a healthy soil microbiome that leads to more root mass and nutrient uptake. #3 Nutrient uptake charts for corn and soybeans have been a great tool for our team to help our customers visualize the crops nutrient needs based on timing during the growing season.
November 21, 2024
The importance of Phosphorus
August 27, 2024
Fungicide applications: the determining factors to be considered
August 20, 2024
Strategic Applied Fertilizer: Reallocation
July 30, 2024
The right nutrient source
June 25, 2024
The right nutrient source!
May 10, 2024
'Tis the Season
April 10, 2024
Wayne Becker, District Sales Manager & Agronomy Specialist Blending two NACHURS products (Triple Option® and Balance®) at a 1:1 ratio has proven to jump start soybeans and increase profitability. Many farmers would like to use in-furrow starter fertilizer with their beans but are uncertain of the benefits. When beans are first planted early growth is very important. • It is a race against time between soybeans and weeds, fighting for water, sunlight and nutrients. • The quicker a canopy is established, the less weeds are able to steal resources, which could affect yield potential. Traditional In-furrow fertilization of beans is usually not as easy to visually observe as when it is applied to corn or wheat. However, that does not mean that they are not extremely important. This treatment will provide early season fertility that will help the young crop remain strong and vibrant, enabling them to better deal with stresses like insects, drought or water logging. NACHURS liquid fertilizer has been providing the best in-furrow fertilizer treatments for 75+ years. With NACHURS in-furrow, producers have always been able to safely provide the traditional benefits without decreasing germination because of the fertilizer’s low-salt content and superior availability. New focus on plant and soil health has raised the bar even higher. The NACHURS Bio-K® line of fertilizers is the most available source of K on the market, yet it also promotes both soil and plant health. Because the Bio-K fertilizer is a carbon molecule combined with potassium, applying it in-furrow provides beneficial soil microbes with a food source. This enables microbes to increase nutrient availability – for all types of crops. Legumes use Rhizobia to “fix” their own nitrogen. NACHURS has developed a product specially designed to stimulate early development of these important soil microbes. It is called Balance®. We combine the rhizobia stimulating qualities of Balance with Triple Option which maximizes quantity of other nutrients. The result is improved potential for early season growth and greater profitability of soybeans
More Posts
Share by: